Products

Earth Station Antenna

-C band & Ku Band Antenna -Ka Band Antenna

Telemetry Antenna

Flyaway Antenna

Drive Away Antenna

Antenna Controller

Customized Product

Home Products Flyaway Antenna

Flyaway Antenna

Newstar is the largest flyaway antenna manufacturer in China. Our flyaway antennas are made of carbon fiber and aluminum reflective materials. The flyaway antennas are available in C-band, X-band, Ku-band and Ka-band, including 0.75m, 1m, 1.2m, 1.8m and 2.4m sizes.

Request a Quote

1.8m C or Ku Band Manual Flyaway Antenna

Factory Price, OEM, ODM

Antenna aperture: 1.8m
Reflector type: Offset
Surface accuracy (RMS): ≤0.5 mm
Panel QTY: 4 pcs
Panel material: Carbon fiber
Azimuth travel: 0°～360°
Elevation travel: 5°～90°
Polarization travel: ±90°
Drive mode: AZ/EL/Pol motorized or manual available
Mount type: El over Az, single pole

Request a Quote

Description

The 1.8m Flyaway antenna reflector is made of carbon fiber by once-mould-pressing, which has the characteristic of light weight, high accuracy and strengthen. Antenna backup support structures and rotary platform are made of special materials, which can not only ensure the strength but also can reduce the antenna weight.

1.8m manual flyaway antenna characteristics:

✔ Meets or exceeds CCIR 580 and INTELSAT requirements;

✔ Meets INTELSAT, ASIASAT, CHINASAT network access requirement;

✔ Offset designed;

✔ High gain, low sidelobe, High G/T rate;

✔ Hot-dip zinc processed Antenna mount, with strong corrosion resistant ability;

✔ 2-port or 4-port optional;

✔ Reasonable structure and easy operation.

1.8m manual flyaway antenna standard configuration:

Main reflector, back support frame, pedestal, supporting legs, feed, feed supporting rods, solid wretch, foundation kit and standard component.

1.8m manual flyaway antenna optional parts:

BUC, LNB, Modem, spectrum analyzer, installation tools, cable and connector.

Performance specification

	C band			Ku band
	Receive	Transmit		Receive		Transmit
Operating frequency (GHz)	3.625～4.2	5.85～6.425		10.95～12.75		13.75～14.5
Gain, Mid-band (dBi)	35.22 @3.95GHz	39.13 @6.2GHz		45.22 @12.5GHz		46.36 @14.25GHz
Polarization	Linear/Circular			Linear
VSWR	1.25:1			1.25:1
Cross polarization Isolation, dB	≥35			≥35
Circular polarisation axial ratio	≤0.75			/
Noise Temperature(K) 10° EL	39°K		/	43°K	/
30° EL	29°K		/	36°K	/
50° EL	26°K		/	32°K	/
G/T dB/K，20°El	16.62 dB/K (30°LNA)		/	24.48 dB/K (70°LNA)	/
-3 db beam width	2.85°		1.82°	0.9°	0.79°
Feed insertion lose (dB)	≤0.2		≤0.2	≤0.2	≤0.2
Tx.Power Capability,Kw	/		5	/	2
Isolation,Tx to Rx,dB	≥85			≥85
Feed interface	CPR-229G		CPR-137G	WR-75
First side lobe	≤ -14
Side lobe envelop	29-25 log(θ) dBi 1°≤θ≤20°

Mechanical specification

Antenna aperture	1.8m
Reflector type	Offset
Surface accuracy (RMS)	≤0.5 mm
Panel QTY	4 pcs
Panel material	Carbon fiber
Panel Surface treatment	Compressed by carbon fiber, degreased and based with yellow zinc paint and finished with antirust white paint
Steel parts surface treatment	Primer base + hot sprayed paint+ anti-rust finish paint
Azimuth travel	0°～360°
Elevation travel	5°～90°
Polarization travel	±90°
Drive mode	AZ/EL/Pol motorized or manual available
Mount type	El over Az, single pole

Environmental specification

Operational wind	72kmph wind speed(Hold the precision)
Survival wind	216kmph wind speed(Upturned lock)
Ice load	13mm wrapped ice normal work 25mm wrapped ice survival
Temperature	-30℃～50℃
Relative humidity	100%
Solar radiation	1135Kcal/h/m2
※ The above specifications may change without prior notice.

5.0 /5 Showing 6 of 1 reviews

Top Reviews

Lobe - MY

5/5 stars

Jan 29.2023

Thé antennae WE purchased years ago are used in Eutelsat network without any pb. It IS true they demandes certified antennae in their network but it IS costy, but our antennae used in Eutelsat network for more than 8 years are working without any problem.

Your rating

Your review *

Name *

Enter your review

Email *

Enter your Email

Submit

Consult an antenna expert now to purchase or customize your antenna.